5000n Electric Linear Actuator, Push Rod

Basic Info.

Model NO.	DTI/500/1000/L40-M60
IP Rating	IP54
Transport Package	Wooden Case
Specification	20096105 (cm)
Trademark	X-ing
Origin	China
HS Code	8
Production Capacity	1000

Product Description

Technical parameters:

model	thrust	speed	push distance	motor model
700	500	L40/M60	120	AQ28036

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needsreciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload protection(mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal, chemical andother industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on, with the advantagesof light weight, strong pulling force, low noise, low energy consumption and convenient installation and maintenance. ,specially for long-distance, high-altitude and dangerous situations instead of hydraulic, pneumatic devices, can beoperated separately on-site and centralized control.Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in theguide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.DT type electric linear actuator Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from 0.25KN to50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate action, reliableperformance, and has built-in overload protection of the mechanical rotation device. In a very wide range of areasan replace or replace the cylinder, the cylinder, especially in high temperature, fire, explosion-proof, pollution-freeenvironmental conditions, is an indispensable supporting equipment.The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the user.To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be configuredDC, frequency, step, speed and other special motor to meet the total control requirements.Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing andother departments.
Technical specification:

NO.	Type	Trust(kg)	Route(mm)	Speed(mm/s)	Motor		380(V)		Le(mm)		contour dimension(LWH)mm	weight(kg)
NO.	Type	Trust(kg)	Route(mm)	Speed(mm/s)	Type	Power(w)	Revolution(T/Min)	Electricity(A)	LeMin	LeMax	contour dimension(LWH)mm	weight(kg)
1	25-20-I	25	200	48	AO25024	40	1400	0.23	369	569	580125118	7.5
2	25-20-II	25	200	96	AO25022	60	2800	0.23	369	569	580125118	7.5
3	100-40-I	100	400	42	AO5624	120	1400	0.47	640	1040	858152206	23
4	100-40-II	100	400	84	AO5622	180	2800	0.52	640	1040	858152206	23
5	300-50-I	300	500	42	AO6334	370	1400	1.12	745	1245	998170226	35
6	300-50-II	300	500	84	AO6332	550	2800	1.38	745	1245	998170226	35
7	500-50-I	500	500	50	AO7134	750	1400	2.02	778	1278	1098190226.5	52
8	500-50-II	500	500	100	AO7132	1100	2800	2.6	778	1278	1098190226.5	52
9	700-60-I	700	600	50	AO7134	750	1400	2.02	803	1343	1193200279	63
10	700-60-II	700	600	100	AO7132	1100	2800	2.6	803	1343	1193200279	63
11	1000-60-I	1000	600	50	JO2-21-4	1100	1400	2.68	883	1483	1260204271	75
12	1000-60-II	1000	600	100	JO2-21-2	1500	2860	3.24	883	1483	1260204271	75
13	1600-80-I	1600	800	50	JO2-31-4	2200	1400	4.9	1063	1863	1535302330
14	1600-80-II	1600	800	100	JO2-31-2	3000	2860	8.06	1063	1863	1535302330

5000n Electric Linear Actuator, Push Rod

OUR WORKSHOP

5000n Electric Linear Actuator, Push Rod

OUR SALES TEAM

Our Service1.Design ServicesOur design team has experience in cardan shaft relating to product design and development. If you have anyneeds for your new product or wish to make further improvements, we are here to offer our support.2.Product Servicesraw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing Fashioning→Cleaning→ Assembly→Packing→Shipping3.Samples ProcedureWe could develop the sample according to your requirement and amend the sample constantly to meet yourneed.4.Research & DevelopmentWe usually research the new needs of the market and develop the new model when there is new cars in themarket.5.Quality ControlEvery step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.6.CertificationShould your products require testing and certification to comply with international standards, we can arrangethis with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd'sRegister or the testing company of your choice.
Thanks for choosing X-ING as your reliable partner and pleasetrust both of us will create a brilliant future!