Silenced Diesel Engine Pump System

Basic Info.

Model NO.	SCP
Structure	The Slide
Silenced Movable Diesel Water Pump	Silenced Movable Diesel Engine Pump
Silenced Movable Diesel Engine Water Pum	Silenced Diesel Engine Water Pump
Silenced Movable Diesel Pump System	Silenced Diesel Pump System
Silenced Diesel Engine Pump System	Silenced Diesel Water Pump System
Transport Package	Wood Case
Specification	SGS
Trademark	Borra
Origin	Wenzhou
HS Code	841330900
Production Capacity	500

Product Description

The silenced diesel engine pump, developed with advanced technologies, is used for emergency fire control and living water supply.Characteristics:1. 1m noise measured 65dB(A)-85dB(A);2. Silenced diesel engine pump, has a compact structure, small;3. The vibration absorbed, to reduce vibration and noise;4. Noise absorbed material-made cover, to reduce noise;5. Noise absorbed compound silencer reduces noise;6. High-efficient noise-off inlet channel;7. Big-capacity fuel tank;8. Cap plate, easy to maintain.Conditions:1. Altitude:≤2500m2. Ambient temperature:-25~55ºC3. Relative humidity:9~95%4. Earthquake: 7 degree5. Flow range: 50-700(L/S)6. Head range: 32-600m7. Diesel engine power: 18-1100KW8. Media part materials: cast iron, graphite cast iron, stainless steel, cast copper.Silenced diesel engine pump:1. automatic start: when receive fire/piping network/power off/other start signals, in 5s, automatic start with full load;2. automatic charging: the storage can carry out automatic charging by industrial power supply or diesel charging motor;3. automatic warning: automatic warning for diesel engine low oil pressure, high water temperature, ultra speed;4. automatic preheat: for emergency;5. Direct coupling: under 360kw, diesel engine pump, innovative, flexible shaft couples, direct coupling.
· Pump Operation
· Do not operate a pump without having read and understood its Operations Manual.
· Do's
· Always disconnect the negative battery cable before working on any pump.
· Make sure all hose joints are properly connected before starting the pump.
· Level the pump using jack stands or cribbing.
· Install cribbing or support when using 8" or larger suction and discharge hoses.
· Allow engine or motor to warm up before raising level to operating speed.
· Raise and lower engine speed gradually.
· Consult with us if operating an engine or motor over 1800 RPM.
· Service diesel engines every 250 hours of running time.
· Open drain valves on volute and non-return valves after shutting down a pump in freezing weather (ice can form and expand, possibly causing damage).
· Take lines apart away from your body in case any remaining liquids spray.
·
· Don'ts
· Don't touch the air compressor outlet line. It can be a hot surface!
· Don't block air flow to the engine radiator (prevents overheating).
· Don't pump liquids with a pH other than 7 (neutral). Internal corrosion may occur.
· Don't pump heavy abrasive material. Internal corrosion may occur.
· Don't run a diesel engine to the point of running out of fuel. The fuel delivery system will need to be bled prior to re-starting the engine.
· Don't open the radiator cap while the engine is still warm.
· Sustainability
· We are committed to providing sustainable products and solutions with all of our pumps and products. We offer tailored pump system design, with the right size and drive equipment for every job, to reduce unnecessary power and materials.
·
Automated pump systems save energy and provide cleaner air and a healthier environment.
Product Sustainability
· Exhaust scrubbers for cleaner air
· Biodegradable oil to help reduce potential damage to the environment
· Critically silenced enclosures for reduced noise pollution
· Office Sustainability
· Recycling initiatives
· Increased safety awareness
· 50% paper reduction by year-end

Silenced Diesel Engine Pump System

Products

Basic Info.

Product Description